Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: ralph on April 06, 2012, 10:45:53 AM

Title: How to remove a Mitel 3300 from a cluster
Post by: ralph on April 06, 2012, 10:45:53 AM

I have a customer that shutdown an office and removed a 3300.
Does anyone know if there is a procedure to remove a system from a cluster?
How about a simple overview of removing a system from a cluster?

Ralph

Title: Re: How to remove a Mitel 3300 from a cluster
Post by: Mattmayn on April 06, 2012, 11:43:12 AM

I haven't removed one in a while (or under the new SDS model), but you should be able to delete the users from that site to remove them from the Tel Dir and then get rid of the CEID routes in ARS, IP trunks and then the two cluster forms.

Just as a warning it was normal for the network elements form to still have the PBX number there after it had been deleted. All of the information associated with it would be deleted but the PBX number would stay.

Title: Re: How to remove a Mitel 3300 from a cluster
Post by: ralph on April 06, 2012, 11:50:47 AM

I forgot to mention that this is version 9 with OPS.

Ralph

Title: Re: How to remove a Mitel 3300 from a cluster
Post by: wiseguy on April 08, 2012, 06:32:51 AM

Your lucky, with ops database it's easyer. Remove all RDN's from that node then remove the route and remove from custer and network elements.

Title: Re: How to remove a Mitel 3300 from a cluster
Post by: martyn on April 10, 2012, 04:05:22 AM

If it were for an SDS cluster then it would be fairly straight forward, but just hope that you don't have to add it back in later!

Title: Re: How to remove a Mitel 3300 from a cluster
Post by: pakman on April 17, 2012, 12:37:45 PM

Hi Ralph,

If you've found any more info regarding this could you let me know. I have almost the same issue in except I'm on 10. All me errors point back to removing items from the remote directory form except this is read only I cannot.

Thanks