Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: ralph on March 27, 2012, 08:19:05 AM

Title: Cisco ATA-187 Setup with Mitel 3300
Post by: ralph on March 27, 2012, 08:19:05 AM

I'm trying to set up a Cisco ATA187.   
1st problem I stumble into is I don't have the default password for the unit.
The Cisco Doc's simply say "enter the pin number".   No where in the doc does it say what the PIN is.
Anyone have an idea?

Also, if you have any tips on using this device with the Mitel 3300 please feel free to share.

Ralph

Title: Re: Cisco ATA-187 Setup with Mitel 3300
Post by: ralph on March 27, 2012, 08:29:15 AM

Figured out the password.
Just took a stab at the password being "cisco" spelled out on the phone.  (24726)

Ralph

Title: Re: Cisco ATA-187 Setup with Mitel 3300
Post by: ralph on March 29, 2012, 01:34:50 PM

To answer my own question..
It appear that the ATA-187 won't work with anything other than a Cisco Call Manager.
I hadn't found a single document that suggest otherwise.   It appears that the ATA-186 will but not the ATA-187.

Ralph