Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: smullin on December 16, 2011, 02:18:53 AM

Title: Mitel 3300 with Two Sim GSM Gateways
Post by: smullin on December 16, 2011, 02:18:53 AM

Hi Folks,

I have a 2 sim gsm gateway which connects to a 4 port bri card. The issue I have is that it will only place the first call. When the second one is made, it comes up busy. The trunk group has two virtual trunks but if I do a trace it looks like it is still trying to use the first one (and the trunk hunt is circular so it should pick up the second one).

Any suggestions would be most appreciated (I've tried this on two 3300s with the same result).

Thanks,
Stephen

Title: Re: Mitel 330 with Two Sim GSM Gateways
Post by: wiseguy on December 16, 2011, 06:16:43 AM

Sounds like a config mismatch between the BRI and the GSM gateway. Are both set to either P2P or P2MP?