Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: notserp on October 21, 2011, 10:44:37 AM

Title: Laptop setup
Post by: notserp on October 21, 2011, 10:44:37 AM

How do I setup my laptop to log-on and communicate with a stand alone and unused MN3300 for practice.

Thanks in advance

Title: Re: Laptop setup
Post by: ralph on October 21, 2011, 11:11:48 AM

You'll need to figure out what IP address the 3300 is.
Then set your laptop to be in the same subnet.

To figure out the IP address you may have to shut it down, connect a serial cable to it at 9600,8,N,1 and watch it boot.
You can stop it when it starts it countdown and says "press space bar".
Once it's stopped, enter 'c' and then just step through the settings by hitting 'enter'.

Ralph

Title: Laptop setup
Post by: MitelUK2010 on October 21, 2011, 04:06:25 PM

Rather than rebooting can't he do a version?

Title: Re: Laptop setup
Post by: ralph on October 21, 2011, 04:42:05 PM

True.
He could use the serial cable and do ChangeBoot.    That would be better.

Ralph

Title: Re: Laptop setup
Post by: notserp on October 23, 2011, 03:28:56 PM

Thanks Guys, much appreciated