Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: simon36500 on July 01, 2011, 01:47:52 AM

Title: Freebox analog line configuration
Post by: simon36500 on July 01, 2011, 01:47:52 AM

Hi,

I'm a french user and try to connect the freebox analog line on a LS port behind my ICP.

I configured the analog line with Orange provider informations and the first call return OK but now, each call is blocked? The message from Free say, invalid code?

So I heard that Free blocks call if it detects that it's a IPBX but I don't know how, and I'm not sure....

So is someone have this working or have an idea?

Thanks.

Title: Re: Freebox analog line configuration
Post by: ralph on July 01, 2011, 05:57:05 AM

I don't think that there is any way for Free to know what is connected on the other end of an analog line.
My first guess would be that the PBX didn't hang up.
Try disconnecting the line from the PBX.
Try to call it.  You should get ringing.
If not, wait 15 minutes and try again.

Let us know what happens.

Note: Wikipedia link for Freebox (http://en.wikipedia.org/wiki/Freebox)
Ralph