Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: acskking on May 25, 2011, 04:46:46 PM

Title: Mitel IVR Setup Question
Post by: acskking on May 25, 2011, 04:46:46 PM

Hello. We have recently installed a 4 port IVR solution and integrated with our Mitel 3300 (4.1). The setup recommended is a hunt group scenario. We now have a test pilot setup. IVR ports for access to pilot are setup as Generic SIP phone currently which provides the 5th caller with a busy signal if all 4 ports are busy. The thought is to add a hunt group with app server ports as members to hunt group? Again, this provides a busy signal. Can I setup an ACD queue to queue callers until the ports become available? If so, how could this be setup? Any assistance would be appreciated. Thanks 

Title: Re: Mitel IVR Setup Question
Post by: ralph on May 26, 2011, 09:39:43 AM

Try adding a RAD to the hunt group to add "all ports busy" message.   
That should allow calls to queue to the group.

Ralph