Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: vorlander on December 10, 2008, 01:49:38 PM

Title: ANALOG FAX & ASU
Post by: vorlander on December 10, 2008, 01:49:38 PM

Hi, does enyone know how much is the max distance between an ASU and a fax?

How many meters must be long the cable that connect the ASU and a FAX?

thank you

Title: Re: ANALOG FAX & ASU
Post by: Mattmayn on December 10, 2008, 06:20:11 PM

I found the following in the rel 9.0 HTRM:

Approximately 5.17 miles (8.28 km) over 22-gauge cable with 300 ohm set, or
3.25 miles (5.19 km) over 24-gauge cable with 300 ohm set, or
2 miles (3.2 km) over 26-gauge with 300 ohm set. -- Minimum 40 Vrms

Hope this helps.

Title: Re: ANALOG FAX & ASU
Post by: vorlander on December 10, 2008, 06:31:53 PM

Thank you very much!

What do you intend for 40Vrms?

Title: Re: ANALOG FAX & ASU
Post by: Mattmayn on December 11, 2008, 11:03:05 AM

All I did was copy and paste that info from the Hardware Technical Reference Manual on MOL.

I was just hoping that it would help you out.