Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: montantece on April 04, 2011, 04:51:27 PM

Title: critical alarm system locksup
Post by: montantece on April 04, 2011, 04:51:27 PM

I have a 200ICP.  lockup in critical alarms
If  I capture the boot up sequence I retrieve the following:

machine check
Exception next instruction address: 0x010aa5e0
Machine Status Register: 0x0004b030
Condition Register: 0x84000842
Task: 0xd390000 "tAppStartup"
xfile: cannot write /db/xrtc file too big

If I perform a hard boot-up, It powers up correctly.  Am once I get to Maintenance logs:
The error is

Critical Alarm being raised detecting the following task suspended tDSP_WD 0X80d4000

What can I do? :'(

Title: Re: critical alarm system locksup
Post by: Chakara on April 07, 2011, 11:36:47 PM

  Not to be a jerk - but I'd look at replacing it . . . . soon.

-Chak