Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: evan631 on March 21, 2011, 03:06:20 PM

Title: Time Server
Post by: evan631 on March 21, 2011, 03:06:20 PM

I know this has been asked before, but i cannot find the answer in forum searches.

I need to know if there is a way to point our 3300's (sw ver 9.0.2.31_1 to a time server that our domain controllers are using.  I would also need to set that same time server to the NuPoint voicemail.

Is this possible? If so how?

Thanks
-Evan

Title: Re: Time Server
Post by: Chakara on March 22, 2011, 07:29:43 PM

  I don't think NTP support was enabled until either 4.0 or 4.1.  I know it isn't in 9.x

-Chak


Update: July-14-2012 by editor:  New How to doc is available here:  How to Set Time on Mitel 3300 (http://www.mitelforums.com/articles/3300/3300-how-to-change-time.php)