Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: mmueck on February 25, 2011, 05:45:57 PM

Title: Adding Analog to Directory Numbers
Post by: mmueck on February 25, 2011, 05:45:57 PM

Hello everyone,

I am newly acquainted to Mitel 3300 ICP and asking for a "How to."
We have an analog block which we have dozens of extra lines for.  How would I go about configuring the PBX to see one of those lines, so we can use that line as a direct line for one of our management? Example:  We have a number XXX-5555, and so-and-so wants this number as a direct line to their phone extension, but that 5555 number is on the analog block.

Any help is appreciated.

Using web interface 7.1.5.13 System Administrator

Title: Re: Adding Analog to Directory Numbers
Post by: Chakara on February 26, 2011, 08:23:28 PM

  That is a really old version of code, but you should be able to do this.

 - Create a new trunk service assignment with the Answer Points set to the managers extension
 - In Analog Trunk Assignment set the Trunk Service Assignment to the new number defined above.
 - You may want to remove that analog trunk from the trunk group it is in to prevent people from getting that line on outbound calls.

Should work....

-Chak