Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: ralph on February 11, 2011, 07:59:52 AM

Title: Command to check processor utilization?
Post by: ralph on February 11, 2011, 07:59:52 AM

Does anyone know the RTC command that shows processor utilization?
I thought I had it but now I can't find it.

Ralph

Title: Re: Command to check processor utilization?
Post by: Mattmayn on February 11, 2011, 01:36:59 PM

My notes show "PS" as the command for that.

Title: Re: Command to check processor utilization?
Post by: ralph on February 11, 2011, 03:46:21 PM

Thank you.  That worked.
But...
The data geek that initailly reported the problem to me said the processor was pegged at %100.
Not true.  Called him and he said:  Oops.  Didn't mean processor.  Meant the NIC."

Crap!
tcpstatShow doesn't give me much to go on.

Ralph

Title: Re: Command to check processor utilization?
Post by: Chakara on February 16, 2011, 09:45:11 PM

  I'm trying to think what could peg it like that.  In the Cisco world I've crushed a network with phone firmware updates.  Wasn't fun.  Might be easiest to look at the switchport the controller is connected to....

-Chak