Mitel Forums - The Unofficial Source
Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: daniel0581 on March 19, 2026, 05:57:07 PM
-
Hello,
I'm a PBX hobbyist and have an SX-200 ICP CXii (amongst other systems) that I picked up years ago and use at my house and tinker with. It's been hit by lightning and is on its last leg. I recently picked up an SX-200 MX controller that was out of service to replace my CXii and but the MX had had the hard drive/CF card removed, but the options sheet was provided. I've got a spare blank CF card and IDE drive, but I'm wondering if anyone would be willing to share the the latest version 5 (I think it's 5.0.2.14) install program so I can get the MX up and running. I had the installer program years ago on a CD that came with the CXii but I can't seem to find it.
Thanks,
Daniel
-
PM sent. You may also consider running this on an internal compact flash in lieu of a spinning disk. Something in the 4GB-16GB would be sufficient and I would use an industrial type. YMMV
-
Thank you John! PM received. That is exactly what I needed. And good call on the internal CF. I forgot that's how I setup my CXii a long time ago. I've got a couple of CF cards I'll give a try. Do you have a particular brand or model CF cards you like to use?
Thanks,
Daniel
-
Good to hear, if you ever need any parts, give me a shout. Retired now but have several new and or used mx/cx hanging around.
-
I had around 20 MX switches i used these on and no issues. See attachedment
-
Thank you both! I have a couple of CF cards and have ordered a couple more just as a backup. John, I may reach out to you once I get the MX up and running. It'll probably be next weekend before I get a chance to tinker with it