Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: MitelUK2010 on January 28, 2011, 08:56:12 AM

Title: Call flow scenario
Post by: MitelUK2010 on January 28, 2011, 08:56:12 AM

4800

Title: Re: Call flow scenario
Post by: wiseguy on January 28, 2011, 09:21:34 AM

The system will prevent calls from Vmail system to Vmail system. Get something in between that is delaying the callflow to the port.

Title: Re: Call flow scenario
Post by: Mitel100 on January 28, 2011, 10:49:15 AM

Mitel always recommends that is using the embedded voicemail as a RAD that you put the RAd in a Hunt Group and point any calls to the Hunt Groups and not directly to the port.

Title: Re: Call flow scenario
Post by: MitelUK2010 on January 28, 2011, 09:51:03 PM

When you say in the middle could you give a recommendation. Putting 99066 in a RAD hunt group, do you think this could resolve the issue?

Thanks

Title: Re: Call flow scenario
Post by: Mitel100 on January 29, 2011, 06:02:12 AM

Putting it in a Hunt Group should resolve the issue.