Mitel Forums - The Unofficial Source

Mitel Forums => Mitel Software Applications => Topic started by: maxcheung on January 26, 2011, 12:04:09 PM

Title: No Voice on Teleworker using SonicWALL
Post by: maxcheung on January 26, 2011, 12:04:09 PM

I set up my TW was in connected state, if I use TW mode's phone call other phone, the phone will ringing,after i pickup the phone, both way is no voice.

is the MAS must pleace in DMZ when i use teleworker? as I watch the TW guideline.
What different between a server in DMZ and forward all port to server's ip ?
how to check MSL was in server-only mode or server-gateway mode?
my firewall is sonicwall 3060.

Thank you very much.

Title: Re: No Voice on Teleworker using SonicWALL
Post by: v2win on January 26, 2011, 04:31:41 PM

Have you tried running the TNA analyzer tool from the outside?

Title: Re: No Voice on Teleworker using SonicWALL
Post by: maxcheung on January 26, 2011, 08:49:08 PM

tested, but not sure what going wrong.
Cap screen FYR.
  <<Chakara removed link - virus infected>>