Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: Johnprogers on April 07, 2025, 05:38:29 PM

Title: Migration tool faults
Post by: Johnprogers on April 07, 2025, 05:38:29 PM

I just thought I would write this up as a warning for others looking to migrate older controllers at this time. Last nights job was a nightmare.

We had an MXe III on MCD 7.1 to take to version 10. This should be best achieved using the migration tool and doing a full migration.

First obstacle was migration tool 9.4.  It refused to do a pre migration check. It said it couldn

Title: Re: Migration tool faults
Post by: acejavelin on April 07, 2025, 05:43:10 PM

You can't go from 7.1 directly to 10... You have to upgrade to the latest 8.0 release, then migrate... if the pre-check fails, you have to correct those items first, until the premigration check passes, then you can continue.

Or am I not understanding your question?

Title: Re: Migration tool faults
Post by: Johnprogers on April 12, 2025, 10:37:24 AM

For some reason only half the post made it.

I just thought I would write this up as a warning for others looking to migrate older controllers at this time. Last nights job was a nightmare.

We had an MXe III on MCD 7.1 to take to version 10. This should be best achieved using the migration tool and doing a full migration.

First obstacle was migration tool 9.4.  It refused to do a pre migration check. It said it couldnt talk to the system as they didn

Title: Re: Migration tool faults
Post by: ralph on April 12, 2025, 02:40:18 PM

I think the problem with it only posting half the post has to do with the preview.
At the moment there isn't a fix for it.
If you post it without using preview it works OK.  If you need to correct something then the edit feature also works OK.

Ralph