Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: ZuluAlpha on November 26, 2024, 10:00:16 AM

Title: Failed Upgrade stuck at resetBus
Post by: ZuluAlpha on November 26, 2024, 10:00:16 AM

I failed an upgrade from 8.0 to 10 and am going through the manual process - everything loaded, but I'm stuck here:

[  OK  ] Listening on sshd.socket.
**** resetBus: no slave detected after bus reset.

Wind River Linux 8.0.0.34 10.111.2.10 ttyS0


Installation in progress!!!

DO NOT POWER DOWN OR REBOOT THE SYSTEM!!!

10 login: **** resetBus: no slave detected after bus reset.
**** resetBus: no slave detected after bus reset.
**** resetBus: no slave detected after bus reset.
**** resetBus: no slave detected after bus reset.
**** resetBus: no slave detected after bus reset.

And I can't seem to get it past this point.

Title: Re: Failed Upgrade stuck at resetBus
Post by: bigyorkshire on November 27, 2024, 10:14:27 AM

Hi there,

Is it physical? If so - what chassis?

Title: Re: Failed Upgrade stuck at resetBus
Post by: ZuluAlpha on December 02, 2024, 10:35:04 AM

It's a physical CXII Chassis. Tried with both an SSD and HDD. I thought the drive might be the issue but it does not appear so.