Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: Teck900 on October 18, 2024, 09:01:30 AM

Title: Can I make a Dss button call a dn and open up the speaker.
Post by: Teck900 on October 18, 2024, 09:01:30 AM
looking to make a DSS/BLF button call an extension as handsfree answer back?

right now I have the button created as a speed dial and I put a * in front of the dn so it will open up the phones speaker on the far end when called,  but the customer would really like to also have the button show when the phone is in use.
Title: Re: Can I make a Dss button call a dn and open up the speaker.
Post by: johnp on October 18, 2024, 05:20:21 PM
i would see is dialing the * and then pressing the current button works?
Title: Re: Can I make a Dss button call a dn and open up the speaker.
Post by: lundah on October 21, 2024, 12:53:50 PM
i would see is dialing the * and then pressing the current button works?

This should work. Enter your Direct Page FAC before pressing the DSS/BLF key, and it sets up an off-hook voice announce to the monitored phone.