Mitel Forums - The Unofficial Source

Mitel Forums => Aastra - MiVoice Office 400 and MiVoice MX-One => Topic started by: mhaddad on August 22, 2024, 11:30:35 AM

Title: MiVoice Office 400 // BOOT MODE ENTERED
Post by: mhaddad on August 22, 2024, 11:30:35 AM

Hello,
I have a Mitel 470 communication server running MiVoice Office 400 and since this morning on the screen it says "BOOT MODE ENTERED", although I try to restart, I don't know at all what to do, can help me?

Title: Re: MiVoice Office 400 // BOOT MODE ENTERED
Post by: bojo387 on August 30, 2024, 04:51:57 AM

Interesting... Boot mode is entered by manually pressing the enter key during red LED phase after turning it on. If you want to exit boot mode, then simply restart.

Title: Re: MiVoice Office 400 // BOOT MODE ENTERED
Post by: Hajoiseb on March 11, 2025, 12:43:56 PM

"Due to aging and potential wear from frequent writes, such as with voicemails, the CF card should be checked and replaced if necessary."

"CF cards are subject to an aging process and can degrade from frequent write cycles, for example, when used for voicemails. Therefore, replacement should be considered."