Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: jchristman2002 on June 27, 2024, 03:27:10 PM

Title: PRI configuration on MiVB
Post by: jchristman2002 on June 27, 2024, 03:27:10 PM

So I have done a lot (well actually just enough) PRI stuff on MiVO 250 but we are now doing MiVB systems.  We almost exclusively use SIP trunks but I have a client that insist on keeping their PRI.   I have never had to set one up in MiVB and I have been going to any documents I find on MiAccess but am not having any luck find a good guide for this.  Can anyone piont me in the right direction for a good step by step for configuring a T1/PRI form scratch on Business?

I am willing to hire out some assistance if anyone is interested in some tutoring.  :-)

Title: Re: PRI configuration on MiVB
Post by: johnp on June 27, 2024, 05:45:34 PM

Help file should give you all that is needed

Title: Re: PRI configuration on MiVB
Post by: ACDeezNutz on June 28, 2024, 11:50:13 PM

The MiVB certification manual has a whole chapter on it with step by step instructions.

Title: Re: PRI configuration on MiVB
Post by: jchristman2002 on July 01, 2024, 11:33:03 AM

Quote from: ACDeezNutz on June 28, 2024, 11:50:13 PM

The MiVB certification manual has a whole chapter on it with step by step instructions.

Thanks, this was very helpful.  It has been so long since I did the training class and we pretty much skipped over this section.