Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: BoiseBorn on June 06, 2024, 11:37:13 AM

Title: MiVB MAC on SMB
Post by: BoiseBorn on June 06, 2024, 11:37:13 AM

Hello,
We installed a new SMB running MiVB (10.0.2.10) today and ran into an issue where the virtual MAC of the MiVB changed when powering it on in it's new location. We had built and programmed the system in a lab environment and then powered it down and moved it to a retail location and powered it back on. Since we use network access control to define VLAN assignment per MAC this caused the MiVB side of the SMB to not come up until we found the new MAC and added it to our endpoint DB. Anyone know of a way to have the MiVB keep the same MAC address once configured?

Title: Re: MiVB MAC on SMB
Post by: BoiseBorn on June 24, 2024, 11:09:42 AM

I ended up finding the answer to my own question. An IP address change of the MiVB will initiate a change in the virtual MAC.

Title: Re: MiVB MAC on SMB
Post by: sarond on June 24, 2024, 07:35:42 PM

Thanks for the update on that.

Good to know.