Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: handwritten on December 05, 2023, 01:34:32 PM

Title: Decommissioning a 200ICP - how do we remove it from the 3300?
Post by: handwritten on December 05, 2023, 01:34:32 PM

We recently removed a 200ICP from our environment. We have a MXe-III running 9.1.1.32, which previously had ARS routes pointed at the 200. We removed the 200 from the Network Elements page in the 3300, but we still get ICP Comms Card alarms complaining about the absent 200. What else do we need to do? The extensions on the 200 are no longer in service.

Title: Re: Decommissioning a 200ICP - how do we remove it from the 3300?
Post by: ZuluAlpha on December 05, 2023, 02:28:54 PM

Make sure it's also removed from Trunks > IP/XNET > ICP/PBX Networking.

I have seen it before where even when this is done a reboot is required to clear the alarm.

Title: Re: Decommissioning a 200ICP - how do we remove it from the 3300?
Post by: handwritten on December 07, 2023, 02:00:47 PM

This worked - thanks very much!