Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: lostiewitness on May 25, 2022, 07:54:21 AM

Title: Reflash 6940 to MiNet From SIP
Post by: lostiewitness on May 25, 2022, 07:54:21 AM

We recently bought a few 6940's from a couple companies, the majority have loaded onto our 3300CX apart from a few which have SIP Firmware installed

I have tried the web recovery server interface and uploading the MINET_6940-enc.st + MINET_6940.st
both come back with error message   "software upgrade failed - invalid active image"


I Have also tried both HTTP + TFTP Server, but the phones are being asked for the following files:
aastra.cfg
startup.cfg
security.tgz

which I do not have, does anyone know where i may find them?
Many thanks, Dan

Title: Re: Reflash 6940 to MiNet From SIP
Post by: lundah on May 25, 2022, 10:26:36 AM

Load the standard SIP firmware, then go into the web admin interface and upload the MINET firmware. You can't load MINET firmware directly from web recovery mode.

Title: Re: Reflash 6940 to MiNet From SIP
Post by: lostiewitness on May 25, 2022, 11:39:12 AM

unfortunately we are unable to load into a web interface unless in recovery mode and no settings to be found to enable it either.



Boot version - 2.1.0.2
SW version -   5.1.0.3069

Any help is much appreciated, thanks in advanced

Title: Re: Reflash 6940 to MiNet From SIP
Post by: lundah on May 31, 2022, 03:17:54 PM

Standard SIP firmware should enable web admin. The MiCloud Connect firmware is a different story. Download the SIP firmware from MiAccess, load that from web recovery mode, then upload the MiNET firmware from the standard SIP web admin.