Mitel Forums - The Unofficial Source
Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: acejavelin on May 02, 2022, 10:24:17 AM
-
Is there any way to suppress the CESID assignment messages in the logs on 6.3 SP7?
-
acejavelin,
I am not sure as we don't install new MiVO-250's anymore, but do you have extended message print turned on?
Most likely they haven't thought to provide a way to remove that from the logs, but if they did I would think it would be under Maintenance; if I had to guess.
Maybe it is because you have the CESID Assignment set to Automatic under the phones; try Emergency CPN if you don't want it to be auto assigned.
Thanks,
TE
-
acejavelin,
I am not sure as we don't install new MiVO-250's anymore, but do you have extended message print turned on?
Most likely they haven't thought to provide a way to remove that from the logs, but if they did I would think it would be under Maintenance; if I had to guess.
Maybe it is because you have the CESID Assignment set to Automatic under the phones; try Emergency CPN if you don't want it to be auto assigned.
Thanks,
TE
Yeah, the CESID assignment type doesn't matter, you just get a different message in the logs related to that mode.
It's not that big of a deal, was just trying to troubleshoot an issue with a system and if I could remove those it would make parsing the file a lot easier, luckily this system is fairly small but I could see with a larger system this could get quite annoying.
-
acejavelin,
Ah, yes, that would make it more difficult to get through on a large system with a lot of entries.
Does this happen after every day or just on a soft reset?
Thanks,
TE
-
acejavelin,
Ah, yes, that would make it more difficult to get through on a large system with a lot of entries.
Does this happen after every day or just on a soft reset?
Thanks,
TE
All day... There are days where are hundreds of these entries...