Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: MiSam on January 25, 2022, 12:10:29 PM

Title: tcpump command not found
Post by: MiSam on January 25, 2022, 12:10:29 PM

Hi All

I have Mivoice Business release 9.1.0.92, When I try to login through butty to shell and run tcpdump for traffic monitor I got tcpdumo command not found.
Can someone help me to active the tcpdump to the shell?

Regards,

Title: Re: tcpump command not found
Post by: ACDeezNutz on April 15, 2022, 11:42:53 PM

You run the command "sip tcpdump on" from the maintenance commands in the GUI and then use WinSCP to get into the vmail folder of the 3300 to get the PCAP is the way I've always done it.

Title: Re: tcpump command not found
Post by: sarond on April 17, 2022, 02:28:28 AM

I am assuming a physical controller. This is a known issue.

If you have access to KMS look at  SO5184.

The solution is to download the tcpdump package from Mitel KMS and install it or upgrade to at least 9.1.0.94 as it was fixed in that release.