Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: ecopower on December 16, 2021, 01:14:50 PM

Title: Mitel 3300 CX II ICP controler 50006093, Configure new router
Post by: ecopower on December 16, 2021, 01:14:50 PM

I have a broken router and I have replaced it with the router TP-link ER605.
I need to login to find the configured static ip address to match that to my new router configuration.
How does one login to the mittel controller? It is unclear if this work via an ip address (I tried many, including 192.168.1.5)
or through other means?

Title: Re: Mitel 3300 CX II ICP controler 50006093, Configure new router
Post by: johnp on December 16, 2021, 03:34:41 PM

It is usually through ip address, default is 192.168.1.2 but this can be changed. Only way to find it for sure is connecting to the maintenance port via RS-232. I guess determining this will be dependent upon version. Not sure with u-boot that you can see this by stopping the boot process

Title: Re: Mitel 3300 CX II ICP controler 50006093, Configure new router
Post by: Dogbreath on December 17, 2021, 05:17:58 AM

If you don't have a serial port you can patch yourself directly into the LAN port and do a packet capture, you will eventually see it ARPing for the default gateway.