Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: squirrell777 on October 11, 2021, 12:37:26 PM
-
We've been using the Mitel 5624s with our Meraki wireless for a year or so now. We've changed a couple units and everything goes fine. The one thing that we MUST do is set the 802.11 protocol to only B/G for them to connect.
We just purchased a 5634, but can't get it to connect. There's no 802.11 option in these, only the band settings.
Anyone else have this issue and find a solution for it? Another thing to note, i don't use a dock to program, just use the Admin panel on the phone itself.
Thanks!
-
You need the programmer + winpdm 3.15
-
Awesome thx! is the programming base the same between the 5624 and 5634? Mitel 5624 Programmer, Part# 51301221
Also, where can i find WinPDM 3.15? Can't find it anywhere in my Mitel portal.
Thx for the help!
-
Awesome thx! is the programming base the same between the 5624 and 5634? Mitel 5624 Programmer, Part# 51301221
Also, where can i find WinPDM 3.15? Can't find it anywhere in my Mitel portal.
Thx for the help!
Same progrmmer for both.
You can find the winpdm in the software download > wifi phones withe the 5634 firmware
Attached screenshot
-
Attached
-
No option for that with the 5634 in my WinPDM
-
maybe becaue we don't have the same version.
you need to download the winpdm from Mitel software download center.
-
I'm using WinPDM straight from Mitel. It's v 3.15.3
Are you sure you're looking at a 5634 and not a 5624? The 5624 has that option both on set and PDM, but the 5634 doesn't have on either.
-
in the winpdm v3.15.3 there is no 5634 option in the template.
so i use the 5624 template for my 5634 and it works.
-
This is quite a bump to this original post!
Is there anywhere I can get Mitel WinPDM, I've looked everywhere for it?
-
Thank you to @johnp I now have two Mitel 5634's setup and working on Asterisk.
Something yesterday I had started to think I would never manage.