Mitel Forums - The Unofficial Source

Mitel Forums => Aastra - MiVoice Office 400 and MiVoice MX-One => Topic started by: klw_dev on October 07, 2021, 09:09:40 AM

Title: Connect Mitel 612d v2 to Mitel Office 400
Post by: klw_dev on October 07, 2021, 09:09:40 AM

Hi all,
we are trying to connect some Mitel 612d v2 (SW 133.3.31). While connecting them the phone itself shows that it is successfully connected. But within the system the time exceeds and nothing happens. The phone is not registered in the system. Is there a incompatibility or how can I manage to get the registration done?
Thank you!

Title: Re: Connect Mitel 612d v2 to Mitel Office 400
Post by: klw_dev on October 08, 2021, 09:45:26 AM

I managed to connect these type of phones by using GAP Profiles within the telephone system rahter than the right DECT profile

Title: Re: Connect Mitel 612d v2 to Mitel Office 400
Post by: bojo387 on October 21, 2021, 11:16:29 PM

Via TDM base station (SB4+ or SB8)? or via SIP-DECT BS? Consider what you did as a work around... but this model acts a system phone with more features if registered as the correct terminal, not GAP.