Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: Steven Meys on September 09, 2021, 10:20:42 AM

Title: Call from 6930 to 5634 keeps trying to connect after the 5634 ignores the call.
Post by: Steven Meys on September 09, 2021, 10:20:42 AM

I can't seem to figure this out. So an internal call is made from a 6930 to a 5634 phone. If i press the "end call" button on the 5634, the 6930 keeps trying to connect as if no button was pressed at al. The call doesn't arrive anymore on the destination but the originating device keeps calling until you hang up.

Is there a way to program a "hangup" when the destination device cancels / ignores  the call?