Mitel Forums - The Unofficial Source

Mitel Forums => Mitel Software Applications => Topic started by: divadiow on August 25, 2021, 03:54:51 AM

Title: Acceptable version gap between server and Micollab client?
Post by: divadiow on August 25, 2021, 03:54:51 AM

Hello.

Is there a maximum server/micollab client version mismatch that's acceptable when depoying the latest Micollab MSI?

For example, I have server version 9.2.0.202 and have deplyed micollab 9.2.153. Can we use 9.3 without any issues? Could we use 9.4 if one is released?

Title: Re: Acceptable version gap between server and Micollab client?
Post by: lundah on August 25, 2021, 08:12:17 AM

I've used 9.3 client with 9.1 servers before with no issues.

Title: Re: Acceptable version gap between server and Micollab client?
Post by: NEPhoneGuy on August 25, 2021, 08:23:16 AM

Check the release notes - they usually specify what version has been tested or approved.
Can find these in the KMS or next to the download article in the Software Download Center.

Depends on the Server Type but the versions supported are listed on page 13.

Title: Re: Acceptable version gap between server and Micollab client?
Post by: divadiow on August 25, 2021, 08:29:20 AM

thanks both

We dont have access to the support center ourselves, we have to go through a vendor, and getting info out of them is a slow painful process.

I cannot find publicly available release notes. only these https://www.mitel.com/en-gb/document-center/applications/collaboration/micollab/micollab-client

Title: Re: Acceptable version gap between server and Micollab client?
Post by: sunspark on August 27, 2021, 04:20:08 AM

i'm using Micollab server 8 with micollab client 9.2