Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: abdulbast on June 28, 2021, 07:02:55 PM

Title: layer 2 switch IP address
Post by: abdulbast on June 28, 2021, 07:02:55 PM

GREETINGS,
i have i problem in my network, my core sw given me a duplicate ip whitch i find that the layer 2 sw in the mitle 3300 have the same ip address of the vlan interface in my lan should i change the ip address for layer 2 sw inside mitle?, and whats is the function that this built-in sw in the PBX
THANK YOU ,

Title: Re: layer 2 switch IP address
Post by: acejavelin on June 29, 2021, 09:56:18 PM

Yes, change the IP address of the switch to a static IP outside of the DHCP range but within the subnet.

You will never use this IP address for anything, but it needs to be there... It is for the switch embedded in the controller.