Mitel Forums - The Unofficial Source

Mitel Forums => Mitel Software Applications => Topic started by: mitel361 on May 17, 2021, 10:30:24 AM

Title: MiCollab AWV silent - install
Post by: mitel361 on May 17, 2021, 10:30:24 AM

MiCollab 8.x; AWV Conferencing 8.x
Anyone know of a way to silently install the AWC client?

What I have done is downloaded the MCAC-Launcher..exe using the User Web Portal.  I can run successfully; however plan on pushing this out to executive level users and prefer to use a silent push.

I've tried MCAC-Launcher..exe with each one of these switches (one at a time) /s /S /q /Help /help /quiet /? /passive

If there is another was to get an installer off my server, please advise as well.

Otherwise, a silent method would be helpful.

Regards

Title: Re: MiCollab AWV silent - install
Post by: pmhaynes on May 18, 2021, 03:50:09 PM

Not sure if this will help

https://phonesystemhelp.info/how-to-download-mcaclient-admin-exe-from-micollab-server/ (https://phonesystemhelp.info/how-to-download-mcaclient-admin-exe-from-micollab-server/)

good luck

Title: Re: MiCollab AWV silent - install
Post by: mitel361 on June 08, 2021, 11:03:03 AM

Mission accomplished...  Can silent install + install per computer instead of per user.

1. As per the referenced article; download the MCAClient-admin  -  http(s)://<servername>/wd/MCAClient-admin.exe
2. Install options /S /v/qn worked