Mitel Forums - The Unofficial Source

Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: RLyon on January 29, 2021, 11:44:52 AM

Title: e-mail reader
Post by: RLyon on January 29, 2021, 11:44:52 AM
How to enable e-mail reader profile
Title: Re: e-mail reader
Post by: acejavelin on January 29, 2021, 02:54:33 PM
Quote from: RLyon on January 29, 2021, 11:44:52 AM
How to enable e-mail reader profile
I am not sure I understand your question here... What "e-mail reader profile"? What are you trying to accomplish here?
Title: Re: e-mail reader
Post by: RLyon on January 29, 2021, 03:15:29 PM
I had the IT provider remote in and verified all the settings are correct and he has IMAP set to port 993 but the system is still looking for port 143. He refuses to open up port 143. I have SSL enabled. The server is using port 587 we verified everything. How can I get the controller to look for port 993 and not 143


Main.Mail.Log
*  TLS error on connection to webmail.xxxxxxxxx.com [192.168.1.249] (SSL_connect): error:00000000:lib(0):func(0):reason(0)
*  TLS session failure: delivering unencrypted to webmail.xxxxxxxxxx.com [192.168.1.249] (not in hosts_require_tls)
*  Exim[18408]: 1l5HEM-0004mo-1T TLS session failure: delivering unencrypted to webmail.xxxxxxxxxxx.com [192.168.1.249] (not in hosts_require_tls)
*  Transport port=587 replaced by host-specific port=587
 * Connecting to webmail.xxxxxxxxx.com [192.168.1.249]:587 ... connected

avdap_log
 *  IMAP ERROR: Connection failed to webmail.xxxxxxxx.com,143: Connection timed out
Title: Re: e-mail reader
Post by: Tech Electronics on January 29, 2021, 04:40:21 PM
RLyon,

It seems you are grasping at straws here.

1. The E-Mail Reader Profile is only for the full blown Enterprise Messager Voice Processor which isn't supported past 5.x.
2. The E-Mail Reader Profile does not work with the built-in Voice Processor.
3. The E-Mail Reader Profile is for ASR functionality only.
4. ASR Functionality required additional licensing on the EM Voice Processor and you can't get additional licensing for any old Inter-Tel equipment as they shut down that service.

If this is only to perform ASR functions without the EM Voice Processor without the correct licensing then you might as well forget it. If this is for an EM-VP then you should have upgraded them to a newer version while they were allowing that to happen at a very low price a very long time ago.

What version of software is the MiVO-250 at for this customer?

Sorry,

TE
Title: Re: e-mail reader
Post by: RLyon on January 29, 2021, 04:59:55 PM
Possibly, when searching the help file for IMAP port 993 it pointed to the Email Reader. The version is 6.2.2 and yes, this is still for that VM to email issue that has been ongoing way to long
Title: Re: e-mail reader
Post by: Tech Electronics on January 29, 2021, 05:32:45 PM
RLyon,

Go to System > E-Mail Gateway > SMTP Port

Change that to 993 and see if that works for you.

The remainder of the IMAP settings are per Mailbox.

Thanks,

TE
Title: Re: e-mail reader
Post by: RLyon on February 03, 2021, 05:59:19 PM
Tech E,

Thank you for the suggestion but that did not work as well. I went to each mailbox and switched it between event and polling.