Mitel Forums - The Unofficial Source

Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: cahrens on January 18, 2021, 11:54:21 AM

Title: PIN replacement code
Post by: cahrens on January 18, 2021, 11:54:21 AM

How do you use the ### PIN replacement code? I have tried using it at the "enter pin and press hold" prompt that a new phone get's when first booting up. I have tried using it as a feature code, pressing the feature key and entering ### but that fails.

It would be handy if I could de-register a broken phone and register the new phone and not have to get into programming to clear the MAC on an extension.

Title: Re: PIN replacement code
Post by: Tech Electronics on January 18, 2021, 12:07:57 PM

cahrens,

Well, if you setup your DB for this then it would work unless you have the phone your replacing still up and running.

Go to System > Phone-Related Information:

Enable PIN Replacement: Yes
Access Code for PIN Replacment: ###

Thanks,

TE

Title: Re: PIN replacement code
Post by: cahrens on January 20, 2021, 04:09:58 PM

Hmmm, not sure what I was doing wrong yesterday but it worked today. Thanks.