Mitel Forums - The Unofficial Source

Mitel Forums => Non-Mitel Chatter => Topic started by: ralph on January 07, 2021, 07:49:25 AM

Title: Non-MBG Servers for Teleworker Connections
Post by: ralph on January 07, 2021, 07:49:25 AM

I have an application that isn't Mitel related.   I need to connect SIP devices as Teleworker devices. 
I know some of you are hosted solutions providers.  I hoping that perhaps someone may have recommendations for a MBG type server that has worked for you.  Both hardware and software only solutions are fine but I would prefer a software solutions.

Any suggestions?

Ralph

Title: Re: Non-MBG Servers for Teleworker Connections
Post by: lundah on January 07, 2021, 02:45:14 PM

Several manufacturer's phones support OpenVPN natively. Fanvil, Sangoma, and ClearlyIP I think can do this. So, set up an OpenVPN server and the phones can connect through that.

Title: Re: Non-MBG Servers for Teleworker Connections
Post by: ralph on January 08, 2021, 07:41:59 AM

Thanks Lundah, but unfortunately our product doesn't.

I've been trying to remember what SBC we used years ago.  Last night I remembered. It was Ingate.  That's sort of what I'm looking for.

Ralph

Title: Re: Non-MBG Servers for Teleworker Connections
Post by: Tech Electronics on January 12, 2021, 12:47:33 PM

Ralph,

Have you looked at the Sangoma SBC that is normally used for Asterisk [FreePBX] installations that require it?

Sangoma SBC (https://www.sangoma.com/voip-security/session-border-controllers/)

Thanks,

TE

Title: Re: Non-MBG Servers for Teleworker Connections
Post by: ralph on January 13, 2021, 04:44:36 PM

I haven't.  Thanks T.E.   I'll pass that along.

Right now we're testing pfSense.

Ralph