Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: pradeepgali on June 02, 2020, 11:37:05 PM

Title: MiVoice Business how to enable Media anchoring
Post by: pradeepgali on June 02, 2020, 11:37:05 PM

Hi,

With the current configuration we have, the media is not anchored by by MiVoice business. Right now, the RTP connects from phone to ITSP(Not using MBG). We are trying to configure the PBX to anchor the media so that we don't need to open the phone IPs in VPN connection to ITSP. 

If the media anchoring on MiVoice Business is possible, would like to know the conflagration changes required. 

From SIP perspective, i want to send the Connection IP in SDP as PBX IP instead of phone IP.

Title: Re: MiVoice Business how to enable Media anchoring
Post by: sarond on June 03, 2020, 04:35:16 AM

Media anchoring is not possible on MiVoice Business. You need an MBG to anchor the media, that's one of the reasons to have one.

Title: Re: MiVoice Business how to enable Media anchoring
Post by: pradeepgali on June 16, 2020, 02:45:14 PM

Thank You for your response.