Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: msouva on May 07, 2020, 12:50:38 PM
-
Good afternooon all,
I have been looking through all the posts in regards to Class of Restrictions. I am hoping someone can help me sort this out. I did not originally set this up, but here is what I have.
COR 22 - No Outside Calls - Table has 21,22
COR 23 - Local Calls - Table has 21-23
ARS Digits Dialed - Local Calls - 9315+7 COR 22
I have confirmed that moving the Station COR from 23 to 22 denies the dial, but I just don't see the logic? In what I have found this setup seems to be backwards? What am I missing?
Thank you,
Mark
-
Good afternooon all,
I have been looking through all the posts in regards to Class of Restrictions. I am hoping someone can help me sort this out. I did not originally set this up, but here is what I have.
COR 22 - No Outside Calls - Table has 21,22
COR 23 - Local Calls - Table has 21-23
ARS Digits Dialed - Local Calls - 9315+7 COR 22
I have confirmed that moving the Station COR from 23 to 22 denies the dial, but I just don't see the logic? In what I have found this setup seems to be backwards? What am I missing?
Thank you,
Mark
I assume that by "COR 22 - No Outside Calls - Table has 21,22" you mean COR Group...
COR Group 22 is assigned to the route for "Local Calls - 9315+7", so any device who's COR is not 21 or 22 will be allowed to use that route. COR GROUP 23 does apply to this route.
The whole COR vs COR Group thing can be confusing... Hope that makes it clearer.
-
Thank you acejavelin! I see the light!! ;D
-
There is an article on how ARS and COR's work here
http://www.mitelforums.com/articles/mitel_ars_programming.php