Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: telecom_guy on September 24, 2008, 04:57:39 PM

Title: DID Conversion
Post by: telecom_guy on September 24, 2008, 04:57:39 PM

Hello,

We received a list of 10 list of phone number from the phone company for our DIDs.  Example:

341-5050
341-5051
341-5052
341-5053
so on.....

I have  extensions that we want to tie this to. 

x18050
x18051
x18052
x18053


How can I make it so when someone dials the main number it will automatically ring the extensions without creating a system speed dial.  Is it in the Digit Modification or ARS?...I would like the range of numbers from the phone company to work with the range of assigned extensions for DIDs.

Any information would be appreciated.

Title: Re: DID Conversion
Post by: Chakara on September 24, 2008, 11:45:24 PM

 it is in trunk service assignment form-  If the telco is handing you 7 digits, set it to absorb 4 and add 18

-Chak

Title: Re: DID Conversion
Post by: telecom_guy on September 25, 2008, 09:55:25 AM

Wouldn't that be in the Digit Modification form?

Title: Re: DID Conversion
Post by: ralph on September 25, 2008, 10:20:12 AM

Quote

Wouldn't that be in the Digit Modification form?

Not on inbound calls.  Chakara is correct.   Inbound digit mod is done through the Trunk Service Assignment form.


Ralph
www.NortelPhones.biz (http://www.NortelPhones.biz)

Title: Re: DID Conversion
Post by: v2win on October 01, 2008, 03:43:10 PM

This is one of the few things I don't like about the Mitel, they need to have an incoming digit conversion table not tied to system speedcall.