Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: rkowals on March 04, 2020, 05:03:01 PM

Title: Message Waiting Light not working
Post by: rkowals on March 04, 2020, 05:03:01 PM

SX-200_ICP, MWI not working, does light up for incoming calls, just not for waiting messages.

Title: Re: Message Waiting Light not working
Post by: johnp on March 04, 2020, 06:27:58 PM

I would check cos for the voicemail ports. Also need to know if all are programmed and within the hunt group. Have any been changed to use as RAD port?

Title: Re: Message Waiting Light not working
Post by: rkowals on March 05, 2020, 02:26:43 PM

All the VM use COS #6, I do not see option 232, but is that needed?  Is there a particular Option Number is needed. 

Title: Re: Message Waiting Light not working
Post by: johnp on March 05, 2020, 07:13:36 PM

I attached a pdf from the manual