Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: sunspark on February 10, 2020, 06:02:11 PM

Title: License violation
Post by: sunspark on February 10, 2020, 06:02:11 PM

Hi guys.  I have 1 Mivb with a dlm and a cluster of 5 Mivb.  I installed the new security certificate on the 4 Mivb and I left the mivb with the dlm at the end.  When I installed my last certificate, after the retrieve license, my dlm went to No, impossible to give it to yes, so I made a clear hardware id of the Garid but since then I can change it to Yes.  I have the error below.  Any idea ?


“licensekeys” or “licensecert” file has
been corrupted

Title: Re: License violation
Post by: ralph on February 11, 2020, 08:48:10 AM

Sounds similar to an issue I had.
I had one site where the controller was blocked from getting to the AMC by the firewall.
When I tried to save the licenses after uploading the new cert, I got that error.
As soon as the firewall issue was corrected it worked fine.

Ralph

Title: Re: License violation
Post by: sunspark on February 11, 2020, 11:29:56 AM

Hi Ralph ,

not really similar case ,

Attached how to resolve it.

Title: Re: License violation
Post by: sarond on February 11, 2020, 08:12:56 PM

So does manually setting the Software Version in AMC resolve this or does AMC support have to get involved?

Title: Re: License violation
Post by: sunspark on February 12, 2020, 04:59:29 AM

1st : need to contact amcsupport@mitel.com to check the Garid Tag version. when its done
2 : go back to : DLM , switch to YES , and sync ARID
3 : SDS sync from networks elements