Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: hamed_vrz on December 12, 2019, 05:13:37 AM

Title: Firmware upgrade- FPGA
Post by: hamed_vrz on December 12, 2019, 05:13:37 AM

Hi Guys.
I replaced RTC card on a MXe III switch and after bootup i faced with a minor Alarm that related to FPGA mismatch.
system suggest UPGRADEBOOTROM ALL command as corrective action.
should i run this command ?
is there any risk to run this command?

Title: Re: Firmware upgrade- FPGA
Post by: johnp on December 12, 2019, 07:08:58 AM

Run the command. It should not cause any issue