Mitel Forums - The Unofficial Source

Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: gimitel on October 24, 2019, 02:56:23 PM

Title: 112 DECT PHONE (UNIVERSAL) AND RFP 12 SINGLE CELL BASE STATION INSTALLATION
Post by: gimitel on October 24, 2019, 02:56:23 PM

Hi Guys,

I am programming an 112 Dect phone with RFP 12 single cell base station, but cannot get the sip extension on handset working.
The looks like sip ext register like for a few seconds and then unregister again. I have only Cat D license on the system.

Can some help me with this one. Or is there a link so i can see how to program it ?

Best Regards,

Gimitel

Title: Re: 112 DECT PHONE (UNIVERSAL) AND RFP 12 SINGLE CELL BASE STATION INSTALLATION
Post by: sarond on October 24, 2019, 11:11:00 PM

You're going to need a Cat F license I'm pretty sure (SIP License)

Title: Re: 112 DECT PHONE (UNIVERSAL) AND RFP 12 SINGLE CELL BASE STATION INSTALLATION
Post by: Magpye on October 25, 2019, 03:45:50 AM

^
Correct, it needs a SIP license (CAT F)

Title: Re: 112 DECT PHONE (UNIVERSAL) AND RFP 12 SINGLE CELL BASE STATION INSTALLATION
Post by: gimitel on October 29, 2019, 05:29:21 PM

Hi Guys,

I have now CAT F License.
But still i cannot get the sip register. I keep getting SIP Error. I programmed the username and password in the Authorization form (inbound) but still the same error.

Can someone help?

Thanks,

Gimitel

Title: Re: 112 DECT PHONE (UNIVERSAL) AND RFP 12 SINGLE CELL BASE STATION INSTALLATION
Post by: Markpie on December 02, 2019, 11:38:42 AM

Did you get this figured out?  I've done quite a few of these and have encountered probably every issue.