Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: Rspector on October 13, 2019, 08:38:02 PM

Title: 3300 wont boot.
Post by: Rspector on October 13, 2019, 08:38:02 PM

Good evening
I have a 3300 controller that won’t boot since it lost power on Friday. I have powered it on with an active serial connection and it successfully gets through the disk checks and the DB checks. The last line I get on my terminal is Reboot - don’t delete chksum file then it just hangs. I can ping and ftp(cant view files in ftp it says guest access is not allowed). I cannot http into the controller and the alarm led is flashing. I should add I cannot telnet Or ssh into it either. Is there a way to reset the alarm via the shell? Or at least see the active alarms?
Thank you
Rob

Title: Re: 3300 wont boot.
Post by: johnp on October 14, 2019, 07:00:34 PM

Sounds like a drive issue