Mitel Forums - The Unofficial Source
Mitel Forums => Introduction and Announcements => Topic started by: krash69 on September 26, 2019, 09:25:49 PM
-
Hello from Canada, 200 room hotel I work at has the Mitel SX200 icp and are interested that I learn. Any Tips on the fast track to knowledge lol. I have found the 3.1 pdf manual and Myadmin pdf so far. Any videos or self help out there ? Thanks for any help Krash
-
Welcome, don't know about any pdf docs as the original supplied was a folio-views file. If you have something that has been convert to pdf that is helpful. For the most part, this isn't much different than the earlier ML/EL type systems. Some may disagree, but it's all good. I find it best to use putty raw on port 2000, with the correct settings for admin as the web stuff is outdated and everything I need to do can be done from a terminal session. It is actual faster to do what may need to be done than the provided web pages IMHO. If using putty, I turn off the line discipline options, this makes it like programming an older 200 system be it ML/EL or Light/Digital system.