Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: mattwilsonuk on December 05, 2010, 11:25:04 AM

Title: Digit Mod - Least Cost Routing
Post by: mattwilsonuk on December 05, 2010, 11:25:04 AM

Hi Guys...

Got a bit of a problem we cant seem to figure out.

I have 1 pbx with ISDN 30 connected.  I have an 0844 number routed into this PBX to a Path.
When users on thie PBX dial the 0844 number I dont want them going down TDM Trunks - have tried digit mod but this still wants to push the call down a trunk - is there anyway I can keep this internal?

Cheers

Matt

Title: Re: Digit Mod - Least Cost Routing
Post by: mattwilsonuk on December 05, 2010, 12:50:57 PM

Done it with a Loopback - Read some of the other posts - Thanks Ralph ;-)

Title: Re: Digit Mod - Least Cost Routing
Post by: ralph on December 06, 2010, 09:16:49 AM

That must have been an earlier post from me about the loop back.   
It's a cool trick for those who can pull off the programming.

Ralph
www.statewidetelecom.com (http://www.statewidetelecom.com)

Title: Re: Digit Mod - Least Cost Routing
Post by: Chakara on December 06, 2010, 10:11:34 PM

  Link?

-Chak

Title: Re: Digit Mod - Least Cost Routing
Post by: ralph on December 07, 2010, 08:34:27 AM

Sorry Chak,
I went looking for the post where I talked about it and couldn't find it.   I know I did but can't remember where. (Might have been on another forum)
Hopefully Matt can shed some light on it.

Ralph
www.dodgetruckspotlight.com (http://www.dodgetruckspotlight.com)