Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: Amal on August 06, 2019, 05:07:14 AM

Title: Message Waiting Lamp is not working on ASU II analog phones.
Post by: Amal on August 06, 2019, 05:07:14 AM

Hi,

Kindly please advise, what are the necessary changes need to be done on the system to make it work.

MXE III - MivoiceBusiness V8.0

IP Phone is working fine
 
Thanks for the Help

Title: Re: Message Waiting Lamp is not working on ASU II analog phones.
Post by: ZuluAlpha on August 06, 2019, 09:47:07 AM

Amal, were they working before or is this a new ASUII deployment?

Are you using NuPoint or imbedded voicemail?

Title: Re: Message Waiting Lamp is not working on ASU II analog phones.
Post by: Amal on August 07, 2019, 02:01:22 AM

Quote from: ZuluAlpha on August 06, 2019, 09:47:07 AM

Amal, were they working before or is this a new ASUII deployment?

Are you using NuPoint or imbedded voicemail?

 it's a new ASU deployment and we are using Embedded voicemail

Thanks

Title: Re: Message Waiting Lamp is not working on ASU II analog phones.
Post by: ZuluAlpha on August 07, 2019, 01:54:44 PM

You will need to make sure the analog extensions have a COS which allows ONS CLASS/CLIP: Message Waiting Activate/Deactivate  Yes

Title: Re: Message Waiting Lamp is not working on ASU II analog phones.
Post by: acejavelin on August 07, 2019, 08:00:46 PM

Quote from: ZuluAlpha on August 07, 2019, 01:54:44 PM

You will need to make sure the analog extensions have a COS which allows ONS CLASS/CLIP: Message Waiting Activate/Deactivate  Yes

This depends entirely on the type of message waiting indication the phones are designed for... There is traditional Neon 90vAC, like most hotels use in their rooms, that is fully supported by Mitel, there is AT&T/Avaya "Definity" Analog LED Msg Waiting (NOT supported by Mitel), and CLASS/CLIP message waiting (sometimes called FSK message waiting) which is typically used by telco voicemail systems and is fully supported by Mitel.

How you setup the port and program it in COS and Analog Circuit descriptor defines how the message waiting is handled.

Some handy reference info: http://www.sandman.com/messwait.html

Title: Re: Message Waiting Lamp is not working on ASU II analog phones.
Post by: Amal on August 13, 2019, 04:15:38 AM

I enabled the Option in COS but still doesn't light up.
 any more options to check or turn On?

Thanks for the help

Title: Re: Message Waiting Lamp is not working on ASU II analog phones.
Post by: johnp on August 26, 2019, 08:02:57 PM

You may need to disable the caller id messaging in their cos. This does work for both and each type require a different cos