Mitel Forums - The Unofficial Source

Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: Enobaham on July 22, 2019, 03:38:51 PM

Title: Mivoice 250 and viking pa-2a
Post by: Enobaham on July 22, 2019, 03:38:51 PM

My boss wants us to be 110% sure before we order the viking PA-2A paging amplifier that it works with the mivoice 250. Does anyone have actual experience hooking these two products up? Or is there a different, maybe preferred, alternative?

Title: Re: Mivoice 250 and viking pa-2a
Post by: RLyon on July 22, 2019, 05:20:35 PM

I was able to integrate a Viking PA-IP with Office 250. Once you download the software you go to the IP settings and there is a SIP Server/ Peer to Peer Settings where you add the Controllers IP. And add a sip phone to the program and under flags enable Ring Intercom Always On/Off.

Title: Re: Mivoice 250 and viking pa-2a
Post by: Enobaham on July 22, 2019, 05:25:06 PM

hmm. Sadly the customer would need to get a sip license. They have digital phones (8568) on the 5000. And no internet...Options may be limited then.

Title: Re: Mivoice 250 and viking pa-2a
Post by: Tech Electronics on July 22, 2019, 05:40:17 PM

Enobaham,

Yes, I have setup hundreds of those on a MiVO-250; it is a simple trunk device. If you have problems you can call Viking directly and they will help you.

Thanks.

TE


Sent from my iPhone using Tapatalk

Title: Re: Mivoice 250 and viking pa-2a
Post by: acejavelin on July 22, 2019, 06:00:29 PM

I have used these in multiple ways... Off the page port and off a trunk port both work, or you can even open a phone and cut the speaker out and use the output inside the phone that would go to the speaker and route it to the PA-2A amp. They are very generic and very versatile, shouldn't be any issues.

Title: Re: Mivoice 250 and viking pa-2a
Post by: Enobaham on July 22, 2019, 06:04:36 PM

Quote

...or you can even open a phone and cut the speaker out and use the output inside the phone that would go to the speaker and route it to the PA-2A amp. They are very generic and very versatile, shouldn't be any issues.

I mentioned that to my boss earlier and his response was "No science projects" hahaha.

So these could would even with out SIP? I am finding a lot of these types of options require a SIP licence. If possible they really don't want to have to buy the licence.

Title: Re: Mivoice 250 and viking pa-2a
Post by: acejavelin on July 22, 2019, 08:06:28 PM

Quote from: Enobaham on July 22, 2019, 06:04:36 PM

Quote

...or you can even open a phone and cut the speaker out and use the output inside the phone that would go to the speaker and route it to the PA-2A amp. They are very generic and very versatile, shouldn't be any issues.

I mentioned that to my boss earlier and his response was "No science projects" hahaha.

So these could would even with out SIP? I am finding a lot of these types of options require a SIP licence. If possible they really don't want to have to buy the licence.

The PA-2A is an analog paging unit... PA-IP is something different entirely.