Mitel Forums - The Unofficial Source

Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: xxovermetalxx on July 19, 2019, 01:31:02 PM

Title: Conference Assistant with Networked Systems
Post by: xxovermetalxx on July 19, 2019, 01:31:02 PM

Hi,
We have two sites, a Mitel 5000 at each. The main site uses a certain extension for the conference bridge. Each user uses their extension as their access code. This works fine.

At the second site, the users can't seem to use their own extensions to start a conference. They are attempting to use the same bridge as the main location. What is the proper way to have everyone using the same extension for the conference bridge?

Thanks for the help!

Title: Re: Conference Assistant with Networked Systems
Post by: acejavelin on July 19, 2019, 05:44:49 PM

Yeah... Ran into this before. This doesn't work. They can only use their extensions as conference bridges on the system they reside on.

Personally, I think this whole thing Mitel does is absolutely absurd, unless your conference bridge isn't accessible to the PSTN (in which case, what good is it). Criminal organizations actively look for open or simple conference systems and use them for illegal activities as it's nearly untraceable. Having the access code be the same as the extension is just asking for trouble in my book. 

Title: Re: Conference Assistant with Networked Systems
Post by: Tech Electronics on July 22, 2019, 08:00:44 AM

xxovermetalxx,

If you don't want to have them use the one on their own system, not sure why you wouldn't though, then you could try creating Users for all of the extension on the remote node and see if that works for you.

Thanks,

TE