Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: Sammingtonz on July 19, 2019, 08:33:51 AM
-
Good afternoon!
I am using MiVoice Business, release level 8.0 and need to get the following to work if possible:
Main reception number rings for 15 seconds > if there is no answer a message/music is played for a total of 20 seconds > if there is still no answer the reception phone is called again for another 15 seconds > if there is no answer again then the call is forwarded to a pickup group.
I currently have the first 2 steps but don't know how to limit the message/music to 20 seconds. I have found the Call Hold Timer and Call Park Timer in CoS but not sure which, if any, is correct.
I am struggling to get the reception phone to ring again after the message/music and then forward that missed call to the relevent group.
Any help/advice would be appreciated as I have been searching and testing to no avail.
Many thanks,
Sam
-
You can't send calls to a pickup group, so I am a little confused... Do you mean hunt or ring group?
But I think you are overthinking this, the end result is to ring (queuing) the receptionist for ~30 seconds, giving a comfort greeting at 15s, then going to a "group". An ACD Express path may be best. Create an ACD Express path with the receptionist extension in it and ring for 30-45 seconds, and play an announcement at 15 seconds, then if no answer recall to the hunt group.
-
My apologies, I meant ring group!
Excellent thank you for that I'll try it out.
-
Is it important to fully play the message? How is this set up now? Think you could have a ring group for the receptionist that last for 35 seconds with a rad after 15, overflows to a second ring group for the receptionist for 15 then overflows to end group.