Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: Amal on June 24, 2019, 05:03:53 AM

Title: Display Wake-up Call information into a Hyper Terminal
Post by: Amal on June 24, 2019, 05:03:53 AM

Hi All,

May I know, how can I display the wake-up call information into Hyperterminal or putty from Mxe III MCD.
For example:
Wake-up call initiated
Wake-up call Answered
Wake-up call canceled

we have an existing Nortel system with this feature and upgrading to Mitel. how can we enable that feature in Mitel MCD?

Thanks for the help.

Title: Re: Display Wake-up Call information into a Hyper Terminal
Post by: Tom2018 on June 24, 2019, 06:00:42 AM

Hi Amal,

you can do this over telnet port 1754
From local help file:
"You can direct hotel logs to LPR1 telnet (port 1754). To do this, configure Port Logical Name as Hotel Motel Logs Port and Port Physical Name as LPR1 in the Application Logical Ports form."

regards,
Tom

Title: Re: Display Wake-up Call information into a Hyper Terminal
Post by: Amal on July 04, 2019, 11:28:59 PM

Thanks, Tom

it's Working.
But it Lists out all the information about PMS for example checkout or check-in. May I know is there any way to display only wake-up call information. Thanks

Title: Re: Display Wake-up Call information into a Hyper Terminal
Post by: Tom2018 on July 08, 2019, 03:46:13 AM

Hi Amal,

unfortunately not, but you can parse the output into a file and filter there.
If your're using a linux terminal it might would be much easier  8)

regards,