Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: ralph on November 23, 2010, 07:59:46 AM

Title: MCD 4.2 Fixed
Post by: ralph on November 23, 2010, 07:59:46 AM

Mitel just posted the "Fixed" version of 4.2.
The only change was the firmware bundle for the phones that fixed the booting issue.


Ralph
www.university-music-on-hold.com (http://www.university-music-on-hold.com)

Title: Re: MCD 4.2 Fixed
Post by: Chakara on November 24, 2010, 08:40:56 PM

  Booting issue?  Do tell.  I just  installed a 4.2 w/5330 and 5340's and no problems so far....

-Chak

Title: Re: MCD 4.2 Fixed
Post by: bluewhite4 on November 24, 2010, 10:09:37 PM

The booting issue he referrs to is that 5330/5340's under the original 4.2 firmware, had issues booting on certain Cisco switches. The new 4.2 had a new firmware load that fixes this issue.

Title: Re: MCD 4.2 Fixed
Post by: wiseguy on November 25, 2010, 02:54:28 PM

10.2.0.26_2 has an other fix/workaround that has not been reported. If SIP IP Dect phones are configured with multi call line then in previous releases this would prevent One Busy All Busy to work for PRG. That has been changed for this load. PRG with Dect phone busy then the PRG is also busy if configurate. :)